Eight Zone Commercial Refrigeration Refrigerant Monitor Typical Configuration Information Request


The typical supermarket application will consist of strategically placed sample points in three areas: Inside the compressor room, inside the cooled spaces and outside the spaces where fittings or valves might be prone to leak.

A typical system will consist of an IR-SNIF-MCD8 with sample points in the compressor room, at least one in each walk in cooler or freezer, possibly sample points above the walk-in near defrost valves and sample points near refrigerated cases. The separate locations can be notified separately by adding Individual Zone Alarm Output option. This consists of up to eight additional DPDT relays that can be mapped to each sample area and mapped to different alarm levels. Audible and visual alarms would be required in the compressor room and inside any occupied cooled space (walk-in coolers or freezers). Audible and visual alarms are not usually placed in the retail area as monitoring that space is for maintenance purposes. 

IR-SNIF MCD8 Eight Zone Refrigerant Monitor, with 4-20 mA analog output and Individual Zone Alarm output options

ACC 020 Combination Horn Strobe Alarm (Quantity 3)

ACC 030 250 Foot Roll 1/4" FRPE Pneumatic Tubing

May we have a Project Name or Reference? (This helps us follow up with you about the project.)

Are you replacing an existing refrigerant monitor? (An existing system might already have strobes and audible alarms that can be used with your new monitor.)

Additonal Notes: Please add any information or questions below.


Tell us about you:

Do you have an account with us?

© Copyright 2019 SenTech Corporation - All Rights Reserved